Search results for '1 1/4 "'
-
2" Weld-in Machined Cap & Neck VENTED
$49.75 As low as: $38.22(SKU: 27038-V) -
2" 45 DEG Fill Pipe
$7.50(SKU: 27005) -
SpinSecure FSS 754 Versalock Vented Female Cap
$49.50(SKU: 81047) -
Flush Aircraft Style Cap
$69.99(SKU: 27021)
-
60-62 Standard (Bed Fill) Stealth EFI W/ In-Tank Pump
$740.00(SKU: 14046) -
3/8 Rollover Vent
$34.00(SKU: 32004) -
Carter Pump
$112.00(SKU: 42002) -
22 Gallon Universal Gas Tank
$285.00(SKU: 11019)
-
Aluminum Bolt In 2" RFH Fill Neck Assembly
$36.80(SKU: 29005) -
1 Gallon Aluminum Fuel Tank
$102.00(SKU: 11002) -
Gates Barricade Carburetion Fuel Line Hose 3/8" Buy By The FT
$2.05(SKU: 37007) -
95 Gallon 72 x 42 x 6
$1,675.00(SKU: 13014)
-
1/8 Female x 1/8 Male 90 degree
$3.70(SKU: 31012) -
1/2" NPT Aluminum Weld in Fitting
$2.55 As low as: $1.58(SKU: 21004) -
1/2 NPT to 1/8 NPT Reducer
$5.36(SKU: 31028) -
1" Full Coupling (AL)
$5.96 As low as: $4.59(SKU: 21020)
-
1-1/2" Machined Aluminum Ribbed Barbs
$22.13(SKU: 21047) -
Sending Unit Flange (Steel)
$11.50 As low as: $7.13(SKU: 22010) -
3/8" Taper Plug W/Pull Ring
$0.24(SKU: 74010) -
1/4" NPT Pickup Tube (18")
$29.25(SKU: 25006)
-
2" Aluminum Cap & Neck Full Function Vented
$79.00(SKU: 27031) -
1/2" NPT Pickup Tube (24)
$49.00(SKU: 25013) -
20x19x14 20 GALLON (NOT TO SPEC)
(SKU: CLE-15-005)Regular Price: $445.00
Special Price: $290.00
-
Twist Cap W/ Steel Neck (Vented)
$16.99(SKU: 27012)
-
2" NPSM Threaded STAINLESS STEEL Weld In Neck
$31.00(SKU: 81050) -
3/8 NPT to 3/8 Hose Barb
$3.50(SKU: 31002) -
.437 ID Replacement Pickup Tube Thread-IN 18" Long (Cut to Length)
$67.93 As low as: $37.36(SKU: 25018-18) -
2" Fuel Gauge 75-10
$36.00(SKU: 34003)
-
25/15 Fueling Station
$2,600.00(SKU: 14016) -
In-Tank EFI Pump System W/ Aeromotive Stealth 340
$349.00(SKU: 41001) -
Universal 12 Gallon Aluminum EFI Tank W/ Sender Plus Aeromotive Fuel Pump
$612.00(SKU: 16008) -
15 Gallon Universal Aluminum Fuel Tank
$259.00(SKU: 11012)
-
Gates Fuel Filler Neck Hose 45* Bend 1 1/2"
$26.63(SKU: 37017) -
Factory Five 33 Hot Rod Stealth EFI
$581.00(SKU: 14006) -
3/4 Male x 3/4 Female 45 degree
$30.40(SKU: 31019) -
1/4" Weld in Half Coupling (AL)
$3.32 As low as: $2.52(SKU: 21011)
-
Isuzu NPR Replacement Aluminum Gasoline Tank Early style
$675.00(SKU: 14034) -
1/8" Weld Bung (Steel)
$1.88 As low as: $1.17(SKU: 22001) -
Ford F Series Aluminum Weld-in OEM Vent Bung
$24.99(SKU: 21050) -
Sending Unit Flange (SS)
$25.50 As low as: $15.81(SKU: 23007)
-
73-87 EFI Side Fill W/ Aeromotive Stealth 340 In-Tank Pump
$686.00(SKU: 14041) -
2.25" RFH Fill Tube
$7.00(SKU: 27003) -
90 DEG Replacement Pickup Tube Thread-IN 36" Long (Cut to Length
$86.04 As low as: $47.32(SKU: 25017-36) -
4" Aluminum Cap & Neck (Vented)
$80.00(SKU: 27019)
-
Boyd CNC Machined Universal Flush Mount Bed Floor Fill Kit
$99.75(SKU: 27042) -
1/2" Thermal Relief Rollover Vent
$58.00(SKU: 32002) -
Mech. Fuel Gauge ( 22")
$75.00(SKU: 34013) -
3 Gallon Universal Gas Tank
$102.00(SKU: 11017)
-
Aluminum Bolt In Wisco Cap Assembly
$45.80(SKU: 29003) -
Gates Barricade Carburetion Fuel Line Hose 1/4" Sold By The FT
$1.65(SKU: 37005) -
60 Gallon 47 x 20 x 16
$814.00(SKU: 13009) -
15 Gallon Aluminum Universal Diesel or Gas Tank
$250.00(SKU: 11021)
-
1/4" NPT Aluminum Weld in Fitting
$2.55 As low as: $1.58(SKU: 21002) -
3/8 NPT to 1/8 NPT Reducer
$2.84(SKU: 31026) -
1/2" Full Coupling (AL)
$4.84 As low as: $3.70(SKU: 21018) -
1" Machined Aluminum Ribbed Barbs
$14.64(SKU: 21045)
-
1.5" Weld Bung (Steel)
$3.52 As low as: $2.18(SKU: 22008) -
1/8" Taper Plug W/Pull Ring
$0.18(SKU: 74008) -
3/4" NPT Pickup Tube (12")
$24.50(SKU: 25004) -
1.5" Taper Plug W/Pull Ring
$0.54(SKU: 74015)
-
1/4" NPT Pickup Tube (24)
$39.00(SKU: 25011) -
.312" ID Replacement Pickup Tube Thread-IN 30" Long (Cut to Length)
$65.67 As low as: $36.12(SKU: 25016-30) -
Twist Cap W/ Aluminum Neck (Vented)
$16.99(SKU: 27010) -
1" Baffle Bulkhead Flow Valve
$62.00 As low as: $47.12(SKU: 44030)Out of stock
-
3" Threaded Cap (NON-Vented)(Locking)
$75.00(SKU: 27030) -
.437 ID Replacement Pickup Tube Thread-IN 6" Long (Cut to Length)
$50.19 As low as: $27.60(SKU: 25018-06) -
2" Fuel Gauge 0-90
$36.00(SKU: 34001) -
Automatic Nozzle
$70.00(SKU: 44011)
-
Aluminum Diesel Transfer Tank Fitting/Cap Package
(SKU: 29001)Regular Price: $156.73
Special Price: $133.23
-
Universal 6 Gallon Aluminum EFI Gas Tank Plus Aeromotive Fuel Pump
$516.00(SKU: 16006) -
11 Gallon Aluminum Gas Tank
$175.00(SKU: 11010) -
Gates Fuel Filler Neck Hose 2" 3FT Long
$59.94(SKU: 37015)
-
63-72 EFI Stealth (Bed Fill)
$686.00(SKU: 14004) -
1/4 Male x 1/4 Female 45 degree
$8.00(SKU: 31017) -
2" NPT Aluminum Weld in Fitting
$11.04 As low as: $6.84(SKU: 21009) -
2 Port Fitting Flange
$28.50(SKU: 21051)Out of stock
-
-12 AN Weld-IN Fitting
$10.50(SKU: 21025) -
67-72 Universal Fuel Tank Mounting Kit
$48.00(SKU: 44021) -
1" NPT Weld Bung (SS)
$11.79 As low as: $7.31(SKU: 23005) -
73-87 EFI Bed FILL W/ IN-TANK A1000 Pump
$951.00(SKU: 14042)
-
1.5 RFH Fill Tube
$5.50(SKU: 27001) -
90 DEG Replacement Pickup Tube Thread-IN 24" Long (Cut to Length
$76.30 As low as: $41.97(SKU: 25017-24) -
2" Aluminum Cap & Neck (NON-Vented)
$49.90(SKU: 27017) -
Boyd 3" ID Flush Billet Fuel Cap Assembly
(SKU: 27041)Regular Price: $89.75
Special Price: $68.25
-
3/8 Male x 3/8 Female 45 degree
$9.20(SKU: 31007) -
57XL series Hydraulic Cap Neck Weld-In Mount Stainless Steel
$28.50(SKU: 23008) -
Mech. Fuel Gauge ( 16.25")
$75.00(SKU: 34011) -
1/4" NPT x 1/4" Hose Barb
$2.37(SKU: 31011)
-
55-59 Chevrolet Truck Rear Mount Aluminum Tank
$398.00(SKU: 14026) -
Gates Barricade Fuel Injection Hose (MPI) 5/16" Sold By The FT
$3.33(SKU: 37003) -
50 Gallon Step Tank
$690.00(SKU: 13007) -
Gates Fuel Filler Neck Hose 90* Bend 2 1/4"
$38.05(SKU: 37022)
-
Factory Five 33 A-1000 EFI
$789.00(SKU: 14013) -
1" NPT to 1" NPT Nipple
$33.52(SKU: 31024) -
1/4" Full Coupling(AL)
$4.44 As low as: $3.40(SKU: 21016) -
3/4" Machined Aluminum Ribbed Barbs
$9.97(SKU: 21043)
-
1" Weld Bung (Steel)
$2.68 As low as: $1.66(SKU: 22006) -
Aluminum Fuel Tank Sump 1/4" NPT
$41.00 As low as: $27.88(SKU: 21057) -
3/8" NPT Pickup Tube (12")
$19.50(SKU: 25002) -
3/4" NPT Pickup Tube (18")
$36.75(SKU: 25009)
-
.312" ID Replacement Pickup Tube Thread-IN 18" Long (Cut to Length)
$55.93 As low as: $30.76(SKU: 25016-18) -
2" 90 DEG Fill Pipe
$7.50(SKU: 27008) -
1.5" NPT Half Coupling (AL)
$8.46 As low as: $6.42(SKU: 21033) -
Turtle Cap
$32.00(SKU: 27028)
-
3" NPT Half Coupling AL
$27.00(SKU: 21036) -
75E - 10F OHM Sending Unit
$48.00(SKU: 33003) -
GPI Inline Meter
$186.00(SKU: 44007) -
Isuzu NPR Replacement Aluminum Diesel Tank
$575.00(SKU: 14019)
-
Aluminum Bolt In Standard Twist Cap Assembly
$43.80(SKU: 29008) -
5 Gallon Aluminum Gas Tank W/ Twist Cap
$129.00(SKU: 11006) -
Gates Fuel Fill Hose 2 1/4" 3FT Long
$84.69(SKU: 37013) -
63-72 Standard (Bed Fill) NON-EFI
$369.00(SKU: 14001)
-
3/4 Female x 3/4 Male 90 degree
$28.22(SKU: 31015) -
1.25" NPT Aluminum Weld in Fitting
$6.00 As low as: $3.72(SKU: 21007) -
Machined Aluminum Tank Sump 1/2" NPT
$65.00(SKU: 26007) -
-8 AN Weld-IN Fitting
$7.50(SKU: 21023)
-
6" Machined Weld in Tank Clean Out Flange
$59.00 As low as: $44.84(SKU: 44022) -
1/2" NPT Weld Bung (SS)
$6.81 As low as: $4.22(SKU: 23003) -
1" Taper Plug W/Pull Ring
$0.42(SKU: 74013) -
Replacement SAE 5 Bolt Sending Unit Flange Gasket
$3.42(SKU: 46005)
-
Aluminum Fuel Sump (Small)
$45.00(SKU: 26001) -
90 DEG Replacement Pickup Tube Thread-IN 12" Long (Cut to Length
$66.56 As low as: $36.61(SKU: 25017-12) -
2" NON-Vented Brass Cap & AL Neck
$58.00(SKU: 27015) -
Shoulder Style Blind Threaded Boss (Large) Click for thread options
$5.75(SKU: 21030)
-
3/8 NPT to 3/8 NPT Nipple
$6.56(SKU: 31005) -
57XL series Hydraulic Cap Neck Weld-In Mount Aluminum
$18.50(SKU: 21101) -
Mech. Fuel Gauge ( 11.75")
$75.00(SKU: 34008) -
7 Gallon Aluminum Tank
$256.04(SKU: 16002)
-
1000 Gallon Fuel Trailer
$9,500.00(SKU: 13024)Out of stock
-
Universal 22 Gallon Aluminum EFI Tank W/ Sender Plus Aeromotive Fuel Pump
$742.00(SKU: 16011) -
35 Gallon 48 x 18 x 10
$515.00(SKU: 13003) -
Gates Fuel Filler Neck Hose 90* Bend 1 1/2"
$26.63(SKU: 37020)
-
F550 Replacement Tank
$638.00(SKU: 14011) -
1/2 NPT to 1/2 NPT Nipple
$10.60(SKU: 31022) -
3/4" Half Coupling (AL)
$3.78 As low as: $2.90(SKU: 21014) -
1/2" Machined Aluminum Ribbed Barbs
$9.19(SKU: 21041)
-
1/2" Weld Bung (Steel)
$1.88 As low as: $1.17(SKU: 22004) -
2.25 Ratchet Cap Pressure Relief Vent with Tether and Aluminum Neck
$49.00 As low as: $37.24(SKU: 27036) -
Heavy Aluminum Mounting Tabs
$2.75(SKU: 24004) -
.312" ID Replacement Pickup Tube Thread-IN 6" Long (Cut to Length)
$46.19 As low as: $25.40(SKU: 25016-06)
-
2.25" 45 DEG Fill Pipe
$8.75(SKU: 27006) -
SpinSecure 754-200 NPT MALE TO MALE ADAPTER
$7.95(SKU: 81048) -
Billet Aluminum Radiator Neck
$28.00(SKU: 81024) -
Replacement Tank Clean Out Gasket 8 Bolt
$9.25(SKU: 46002)
-
0-90 OHM Sending Unit
$48.00(SKU: 33001) -
5/16 Inline Fuel Filter
$16.50(SKU: 44005) -
26 Gallon Universal Fuel Tank
$349.00(SKU: 11020) -
Aluminum Bolt In Pickup Tube & Return Assembly
$53.50(SKU: 29007)
-
2 Gallon Vertical Aluminum Gas Tank
$149.00(SKU: 11003) -
Gates Fuel Fill Hose 1 1/2" 3FT Long
$67.14(SKU: 37011) -
110 Gallon Hummer H1 Aux Tank
$1,050.00(SKU: 13016) -
1/4 Female x 1/4 Male 90 degree
$5.00(SKU: 31013)
-
3/4" NPT Aluminum Weld in Fitting
$3.42 As low as: $2.12(SKU: 21005) -
1/2 NPT to 1/4 NPT Reducer
$4.60(SKU: 31029) -
-4 AN Weld-IN Fitting
$6.50(SKU: 21021) -
2" Machined Aluminum Ribbed Barbs
$27.98(SKU: 21049)
-
1/4" NPT Weld Bung (SS)
$6.81 As low as: $4.22(SKU: 23001) -
1/2" Taper Plug W/Pull Ring
$0.24(SKU: 74011) -
3/8" NPT Pickup Tube (18")
$29.25(SKU: 25007) -
73-87 Standard NON EFI Bed Fill
$369.00(SKU: 14038)
-
3/4" NPT Pickup Tube (24)
$49.00(SKU: 25014) -
Custom Tank Fabrication Deposit
$0.00(SKU: FAB-DEP) -
Twist Cap W/ Steel Neck (NON-Vented)
$16.99(SKU: 27013) -
5 Bolt Fuel Level Sending Unit to 2" NPT Adapter
$45.00 As low as: $27.90(SKU: 44027)
-
1/2 NPT to 3/8 NPT Reducer
$6.12(SKU: 31003) -
Triumph TR6 NON EFI
$475.00(SKU: 14020) -
Mech. Fuel Gauge ( 7.5")
$75.00(SKU: 34005) -
Craftsman 5600 15 gallon
$199.00(SKU: 14015)
-
150 Gallon Diesel Fuel Trailer
$3,500.00(SKU: 13022)Out of stock
-
Universal 15 Gallon Aluminum EFI Tank W/ Sender Plus Aeromotive Fuel Pump
$653.00(SKU: 16009) -
22 Gallon Aluminum Gas Tank W/ RFH Filler
$285.00(SKU: 11014) -
Gates Fuel Filler Neck Hose 45* Bend 2"
$33.43(SKU: 37018)
-
Factory Five Roadster (MKII)
$490.00(SKU: 14007) -
1/8 NPT to 1/8 NPT Nipple
$2.80(SKU: 31020) -
3/8" Half Coupling (AL)
$3.44 As low as: $2.64(SKU: 21012) -
1/4" Machined Aluminum Ribbed Barbs
$8.89(SKU: 21039)
-
1/4" Weld Bung (Steel)
$1.88 As low as: $1.17(SKU: 22002) -
8 Gallon Aluminum Universal Fuel Tank
$150.00(SKU: 11022) -
2" Gusseted Aluminum Mounting Tabs
$6.25(SKU: 24002) -
Kelch Target 350 (VENTED) Cap and Aluminum Machined Neck
$65.00(SKU: 27046)
-
1.5" 45 DEG Fill Pipe
$6.25(SKU: 27004) -
CUSTOM OPTION ****CENTER FILL***
$25.00(SKU: CUST-CENTERFILL) -
4" Aluminum Cap & Neck (NON-Vent)
$80.00(SKU: 27020) -
60-62 Standard (Bed Fill) NON-EFI
$422.00(SKU: 14044)
-
Mushroom Vent
$26.00(SKU: 32003) -
5/16 Fuel Line (clear)
$11.50(SKU: 37001) -
5 Gallon Universal Fuel Tank
$129.00(SKU: 11018) -
Aluminum Bolt In Threaded Cap Assembly
$53.30 As low as: $40.51(SKU: 29004)
-
1/2 Gallon Aluminum Gas Tank
$102.00(SKU: 11001) -
Gates Barricade Carburetion Fuel Line Hose 5/16" Buy By The FT
$1.85(SKU: 37006) -
75 Gallon Auxiliary Diesel Fuel Tank
$898.00(SKU: 13013) -
Rubber Hood Latch
$13.00(SKU: 73007)
-
3/8" NPT Aluminum Weld in Fitting
$2.55 As low as: $1.58(SKU: 21003) -
3/8 NPT to 1/4 NPT Reducer
$3.82(SKU: 31027) -
3/4" Full Coupling (AL)
$5.08 As low as: $3.89(SKU: 21019) -
1-1/4" Machined Aluminum Ribbed Barbs
$15.17(SKU: 21046)
-
2" Weld Bung (Steel)
$3.88 As low as: $2.41(SKU: 22009) -
1/4" Taper Plug W/Pull Ring
$0.18(SKU: 74009) -
1" NPT Pickup Tube (12")
$27.50(SKU: 25005) -
2" Taper Plug W/Pull Ring
$0.72(SKU: 74016)
My Cart
You have no items in your shopping cart.
Payment Options
Request Tank Quote
Shop By
Shopping Options
- Category
-
- Parts (281)
- Universal Tanks (34)
- Transfer Tanks (18)
- Replacement Tanks (35)